Seat Assembly Replacement

Remove the rear seat cushion (A).

Fig 1: Removing Rear Seat Cushion
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the rear seat heater connectors (A).

Fig 2: Disconnecting Rear Seat Heater Connectors
Courtesy of KIA MOTORS AMERICA, INC.
After loosening the mounting bolts, then remove the rear seat back (A).
Tightening torque:

16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3~18.8lb-ft)

Fig 3: Removing Rear Seat Back
Courtesy of KIA MOTORS AMERICA, INC.
Installation is the reverse of removal.
NOTE:
- Make sure the connector is plugged in properly.