LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Forte Koup EX, Standard Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Seat Electrical >> Seat Heater (Non-Air Ventilation) >> Repair Procedures >> Inspection >> Second Seat

Second Seat

  1. Check fo continuity and measure the resistance between terminals.
    Fig 1: Measuring Resistance Between Second Seat Terminals
    G11792241Courtesy of KIA MOTORS AMERICA, INC.
    No. Description
    1 Battery (+)
    2 IGN 1
    3 LED High
    4 IGN 2
    5 LED Low
    6 Ground
    7 Heater switch
    8 -
  2. Operate the seat heater after connecting the connector, and then check the thermostat by measuring the temperature of seat surface.
      1st 2nd
    Cushion (±2°C) 36°C 39°C
scientia non olet · About LEMON Manuals