LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Forte Koup EX, Standard Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Seat Electrical >> Seat Heater (Non-Air Ventilation) >> Repair Procedures >> Inspection >> Front Seat

Front Seat

  1. Check for continuity and measure the resistance between terminals.
    Fig 1: Measuring Resistance Between Front Seat Terminals
    G11792240Courtesy of KIA MOTORS AMERICA, INC.
    No. Description
    1 Heater (+)
    2 NTC (+)
    3 NTC (-)
    4 Heater (-)

    Standard value (Fabric/Leather) 

    Cushion:  1.14 Ω ± 10%

    Back:  1.04 Ω ± 10%

    Set:  2.18 Ω ± 10%

  2. Operate the seat heater after connecting the connector, and then check the NTC by measuring the temperature of seat surface.
      1st 2nd 3rd
    Cushion (±2°C) 36°C 39°C 42°C
    Back (±2°C) 40°C 45°C 50°C
scientia non olet · About LEMON Manuals