LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Forte Koup EX, Standard Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Seat Electrical >> Seat Heater (Air Ventilation) >> Repair Procedures >> Inspection >> Front Seat Heater (Driver)

Front Seat Heater (Driver)

  1. Check for continuity and measure the resistance between terminals.
    Fig 1: Inspect Front Seat Heater (Driver)
    G11792236Courtesy of KIA MOTORS AMERICA, INC.
    No. Description
    1 -
    2 Ground
    3 Heater cushion
    4 Heater back
    5 -
    6 NTC +
    7 Power
    8 NTC -
    9 Back blower
    10 Cushion blower

    Standard value (Fabric/Leather) 

    Cushion:  5.86Ω ± 10%

    Back:  4.19Ω ± 10%

    Set:  10.05Ω ± 10%

  2. Operate the seat heater after connecting the connector, and then check the NTC by measuring the temperature of seat surface.
      1st 2nd 3rd
    Cushion (±2°C) 36°C 39°C 42°C
    Back (±2°C) 40°C 45°C 50°C
scientia non olet · About LEMON Manuals