Repair Procedures: (5Door)
CAUTION:
- Put on gloves to protect your hands.
NOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care not to bend or scratch the trim and panels.
- Remove the rear seat back cover [LH]or [RH].
(Refer to Rear Seat - "REAR SEAT BACK COVER ")
- After loosening the mounting bolts and screws, then remove the rear seat latch (A).
Tightening torque:
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
- Remove the rear seat latch rod (A) to direction of the arrow.
- Install in the reverse order of removal.