Head Lamp (low) Bulb

[Gdneral Type] 

1. Turn the lamp switch off.
2. Disconnect the connector.
3. Remove the dust cap (A).
   Fig 1: Remove Head Lamp (Low) Bulb Dust Cap

   Courtesy of KIA MOTORS AMERICA, INC.
4. Separate the bulb connector (A) from the head lamp assembly.
   Fig 2: Remove Bulb Connector From Head Lamp Assembly

   Courtesy of KIA MOTORS AMERICA, INC.
5. Remove the bulb (A) from the connector.
   Fig 3: Remove Bulb From Connector

   Courtesy of KIA MOTORS AMERICA, INC.

   [HID Type] 

   CAUTION: Turn the head lamp switch off to avoid high voltage
   Be careful not to damage the bulb and use genuine bulbs only

   • Do not apply excessive force and fit it correctly.
   • Confirm the bulb locking
   1. Turn the head lamp switch off.
   2. Disconnect the connector.
   3. Remove the dust cap (A).
      Fig 4: Locate Dust Cap (HID Type)

      Courtesy of KIA MOTORS AMERICA, INC.
   4. Remove the ignitor (A) after loosening the screws.
   5. Remove the ignitor and HID bulb (B).
      Fig 5: Remove Ignitor And HID Bulb

      Courtesy of KIA MOTORS AMERICA, INC.