LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Accessories & Equipment >> Heated Glass/Defoggers >> Rear Glass Defogger System >> Rear Glass Defogger Switch >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the center fascia panel.

    (Refer to Body - "CRASH PAD ")

  3. Remove the heater control unit (A) after removing screws (4EA).
    Fig 1: Removing Heater Control Unit Screws
    G11786084Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals