LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior Trim & Glass >> Roof Trim >> Repair Procedures >> Replacement >> Vanity Lamp Replacement

Vanity Lamp Replacement

  1. Using a screwdriver or remover, remove the vanity lamp (A).
  2. Disconnect the vanity lamp connector (B).
    Fig 1: Locating Vanity Lamp And Connector
    G11785209Courtesy of KIA MOTORS AMERICA, INC.
  3. Installation is the reverse of removal.
    NOTE:
    • Make sure the connector is plugged in properly.