LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior Trim & Glass >> Interior Trim >> Repair Procedures >> Replacement >> Center Pillar Trim Replacement

Center Pillar Trim Replacement

NOTE:
  • Put on gloves to protect your hands.
  • When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
  • Take care not to bend or scratch the trim and panels.
  1. Remove the front door scuff trim and rear door scuff trim.
  2. The seat belt anchor pretensioner (A) be removed after pushing the lock pin (B) as arrow direction.
    Fig 1: Locating Seat Belt Anchor Pretensioner And Lock Pin
    G11785226Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the center pillar lower trim (A).
    Fig 2: Locating Center Pillar Lower Trim
    G11785227Courtesy of KIA MOTORS AMERICA, INC.
  4. After loosening the mounting bolts, then remove the center pillar upper trim (A).
    Fig 3: Locating Center Pillar Upper Trim With Mounting Bolts
    G11785228Courtesy of KIA MOTORS AMERICA, INC.
  5. Installation is the reverse of removal.
    NOTE:
    • Replace any damaged clips.