LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior Trim & Glass >> Crash Pad >> Repair Procedures >> Replacement >> Center Fascia Panel Replacement >> Center Fascia Lower Panel

Center Fascia Lower Panel

NOTE:
  • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Put on gloves to protect your hands.
  1. Using a screwdriver or remover, remove the center fascia lower panel (A).
    Fig 1: Removing Center Fascia Lower Panel Using Screwdriver Or Remover
    G11785161Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the in-car hose (A).
  3. Disconnect the A/C & heater controller unit connectors (B) from the center fascia lower panel.
    Fig 2: Locating In-Car Hose Or A/C & Heater Controller Unit Connectors
    G11785162Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse of removal.
    NOTE:
    • Make sure the connector are connected in properly.
    • Replace any damage clips.