LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Lane Departure Warning System Diagnosis >> DTC C1616: CAN Bus OFF >> Wiring Inspection >> CAN Resistor And Communication Line Inspection >> CAN Resistor Inspection

CAN Resistor Inspection

  1. Ignition OFF.
  2. Disconnect PCM and Instrument Cluster connectors.
  3. Measure resistance between C-CAN Low and C-CAN High terminal of each PCM and Instrument Cluster Modules.

    Specification:  About 120 Ω

  4. Is the measured value within specification?

    YES 

    NO 

    • If the measured value is out of specification, repair or replace 120Ω CAN register (Inside of PCM and Instrument Cluster) and then, go to "CAN COMMUNICATION LINE INSPECTION " procedure.
scientia non olet · About LEMON Manuals