| DTC Strategy |
- Monitoring motor rotating time and activation current
|
- No disc or pad
- Wiring problem
- Faulty Brake caliper assembled condition
- Faulty actuator
|
| Enable conditions |
- IG "ON"
- Normal battery voltage
- EPB activation
|
| Threshold value |
- If actuator runs for a long time
- If right motor current is much bigger than left motor current
- Motor current decreases rapidly or runs for long time
- Actuator runs for enough time but adequate clamping force was not achieved
|
| Fail Safe |
- Right actuator activation inhibited
|