LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Seat Electrical >> Seat Heater Switch >> Repair procedures >> Inspection >> Rear Seat Heater Switch

Rear Seat Heater Switch

  1. Disconnect the negative (-) battery terminal.
  2. Open the rear seat arm rest (A).
    Fig 1: Rear Seat Arm Rest
    G11785949Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the rear seat arm rest upper cover (A).
    Fig 2: Removing Rear Seat Arm Rest Upper Cover
    G11785950Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the connector (A).
    Fig 3: Disconnecting Rear Seat Arm Rest Connector
    G11785951Courtesy of KIA MOTORS AMERICA, INC.
  5. Turn rear seat heater switch ON and check that continuity exists between the terminals.
    Fig 4: Rear Seat Arm Rest Connector Terminals
    G11785952Courtesy of KIA MOTORS AMERICA, INC.
    Fig 5: Rear Seat Arm Rest Connector Terminals Continuity Chart
    G11785953Courtesy of KIA MOTORS AMERICA, INC.
  6. If there is no continuity, replace the seat heater switch (A).
Fig 6: Replacing Seat Heater Switch
G11785954Courtesy of KIA MOTORS AMERICA, INC.