Front Seat

Remove the front seat assembly.
(Refer to Body - "FRONT SEAT ")
Remove the seat back cover and cushion cover.
(Refer to Body - "FRONT SEAT ")
Remove the ventilation duct (A) after loosening screws and removing fixing hook (B).

Fig 1: Loosening Ventilation Duct Screws
Courtesy of KIA MOTORS AMERICA, INC.
Remove the air ventilation panel (A) and fixing clip (B) from seat cushion.

Fig 2: Removing Air Ventilation Panel (1 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Removing Air Ventilation Panel (2 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.
Remove the climate blower and duct (A) after loosening the fixing clips and screws.

Fig 4: Removing Climate Blower And Duct
Courtesy of KIA MOTORS AMERICA, INC.
Remove the climate control unit (A) after loosening the mounting screws.

Fig 5: Removing Climate Control Unit (1 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 6: Removing Climate Control Unit (2 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.

NOTE: Remove the fixing clip (A) as shown in illustration with arrow direction, and then remove connector by pressing the knob (B).
Make sure the connectors and fixing clips are plugged in properly when installing process.

Fig 7: Removing Climate Control Unit Connector
Courtesy of KIA MOTORS AMERICA, INC.