LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Fuel Filler Door >> Fuel Filler Door Release Actuator >> Repair procedures >> Inspection

Repair procedures: Inspection

  1. Open the fuel filler door and remove the fuel filler door release actuator (A) after loosening the mounting bolts.
    Fig 1: Removing Fuel Filler Door Release Actuator
    G11785966Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the trunk room left side trim.

    (Refer to Body - "INTERIOR TRIM ")

  3. Disconnect the release actuator connector (A).
    Fig 2: Locating Release Actuator Connector
    G11785967Courtesy of KIA MOTORS AMERICA, INC.
  4. Check for continuity between terminal No. 1 and No. 2.

    If there is no continuity, replace the fuel filler door opener.

scientia non olet · About LEMON Manuals