LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Keyless Entry & Burglar Alarm >> Repair procedures >> Inspection >> Burglar Horn Inspection

Burglar Horn Inspection

  1. Remove the burglar horn (A) after removing 1 bolt and disconnect the 2P connector from the burglar horn.
    Fig 1: Removing Burglar Horn
    G11785870Courtesy of KIA MOTORS AMERICA, INC.
  2. Test the burglar horn by connecting battery power to the terminal 1 and ground the terminal 2.
  3. The burglar horn should make a sound. If the burglar horn fails to make a sound replace it.
scientia non olet · About LEMON Manuals