LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat Electrical >> Seat Heater Switch >> Repair procedures >> Inspection >> Front Seat Heater Switch

Front Seat Heater Switch

  1. Disconnect the negative (-) battery terminal.
  2. Remove the floor console upper cover (A).

    (Refer to Body - "CONSOLE ")

  3. Remove the seat heater switch connector (A) from the floor console upper cover.
    Fig 1: Locating Seat Heater Switch Connector Terminals
    G11785945Courtesy of KIA MOTORS AMERICA, INC.
  4. Operate each seat heater switch and check that continuity exists between the terminals.

    If there is no continuity, replace the seat heater switch

scientia non olet · About LEMON Manuals