LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Rear Curtain System >> Rear Curtain Switch >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the passenger compartment junction box cover.
  3. Remove the crash pad side switch assembly (A) by pushing it through junction box cover hole.
    NOTE: Put on gloves to protect your hands.
    Fig 1: Locating Crash Pad Side Switch Assembly
    G11786137Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the rear curtain switch (A) after disconnecting the connectors.
Fig 2: Locating Rear Curtain Switch Connectors
G11786138Courtesy of KIA MOTORS AMERICA, INC.