Repair procedures: Removal

Disconnect the negative (-) battery terminal.
Remove the front bumper.
(Refer to Body - "FRONT BUMPER ")
Loosening the head lamp mounting bolts (A) (4EA) and disconnect the head lamp connector (B).
Then, remove the head lamp assembly (C).
NOTE:
- Take care not to scratch the head lamp lens or fender.
Fig 1: Loosening Head Lamp Mounting Bolts (1 Of 3)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 2: Loosening Head Lamp Mounting Bolts (2 Of 3)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Loosening Head Lamp Mounting Bolts (3 Of 3)
Courtesy of KIA MOTORS AMERICA, INC.

NOTE: Take care that holding clip (A) is not to be damaged.

Fig 4: Locating Holding Clip
Courtesy of KIA MOTORS AMERICA, INC.
In case of HID type, disconnect the head lamp leveling actuator connector (A).

Fig 5: Locating Head Lamp Leveling Actuator Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the dust caps from the head lamp assembly after turning in the counter clock-wise direction.
1. Head Lamp (High) Cap
2. Head Lamp (Low) Cap
3. Turn Signal Lamp
Fig 6: Removing Dust Caps From Head Lamp Assembly
Courtesy of KIA MOTORS AMERICA, INC.