LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Optima SX Turbo >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Fuel Filler Door - Optima (Except HEV) >> Fuel Filler Door Release Actuator >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Remove the trunk room left side trim.

    Proceed to: TRUNK TRIM .

  2. Remove the fuel filler door release actuator (A) after loosening the mounting bolts.
    Fig 1: Filler Door Release Actuator & Mounting Bolts
    G07380832Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the release actuator connector (A).
    Fig 2: Release Actuator Connector End View
    G07380833Courtesy of KIA MOTORS AMERICA, INC.
  4. Check for continuity between terminal No. 1 and No. 2.

    If there is no continuity, replace the fuel filler door release actuator.

scientia non olet · About LEMON Manuals