Seat Frame Replacement

Remove the following parts :
1. Front seat
2. Front seat back cover
3. Front seat cushion cover
After loosening the mounting screw, then remove the front seat shield inner cover (A).

Fig 1: Front Seat Shield Inner Cover
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the connector (C).
After loosening the mounting bolts, then disconnect the seat back frame (A) and seat cushion frame (B).
Tightening Torque:

49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)

Fig 2: Seat Back Frame, Seat Cushion Frame & Connector
Courtesy of KIA MOTORS AMERICA, INC.
Installation is the reverse of removal.
NOTE:
- Remove the side air bag for replacing side air bag installation seat.
- Before service, be fully aware of precautions and service procedure relevant to air bag.
  Proceed to: GENERAL SAFETY INFORMATION AND CAUTION .
- Be sure to perform PODS re-zero with the GDS after replacing parts (Passenger's).