DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	CAN Message Monitoring	Sensor or system error concerned TCU EPB ECU
Enable condition	C1616 (CAN BUS Off) no DTC Normal battery voltage Ignition "ON" after 2 sec.
Threshold value	Gear selector display signal is fault for over 50 times (more than 500 msec) within normal voltage condition
Warning Indicator Lamp Status	Warning Indicator Lamp "ON"
Fail Safe	Dynamic Braking (ESC) inhibited EPB auto release function inhibited
Clear Condition	Ignition "OFF" and then "ON"