LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Optima Hybrid >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Electric Parking Brake Diagnosis - Optima HEV >> DTC C1604: ECU Hardware Error >> Wiring Inspection >> Terminal and Connector Inspection

Terminal and Connector Inspection

  1. Many malfunctions in the electrical system are caused by poor harness and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
  2. Thoroughly check all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, and/or damage.
  3. Has a problem been found?

    YES 

    NO 

    • Carefully re-do this troubleshooting guide steps.
    • If problem still occurs, replace EPB ECU and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
scientia non olet · About LEMON Manuals