| DTC Strategy |
|
- Poor connection or damaged wiring
- BLS
- EPB switch open or short
- EPB ECU
|
| Enable condition |
- EPB Wake up status, CAN signal normal, normal battery condition
|
| Threshold value |
- BLS CAN signal is mis-matched with hardwired BLS for 2 minutes.
- BLS signal continues stuck "ON" for more than 1 min. under condition of TPS is more than 12% and the speed of vehicle is more than 10 km/h (Approx. 6.2 mph).
- BLS signal does not change after driving with over 40 km/h (Approx. 25 mph) and stop for 3 times.
|
| Warning Indicator Lamp Status |
- Warning Indicator Lamp "ON"
|
| Fail Safe |
- Dynamic Braking (ESC) inhibited
|
| Reset Condition |
- Ignition "OFF" and then "ON"
|