LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Optima Hybrid >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Active Hydraulic Boost (AHB) System - Optima HEV >> Pressure Source Unit >> Repair Procedures >> Installation >> Notes

Repair Procedures: Installation: Notes

  1. Installation is the reverse of removal.
  2. Check the brake pedal operation.
  3. After filling the brake fluid in the reservoir, perform the air bleed. (Refer to BLEEDING OF BRAKE SYSTEM )
  4. Conduct calibration after removing the brake pedal assembly. (Refer to CALIBRATION PROCEDURE )
  5. Tighten the PSU bracket bolts and brake tube to the specified torque.
  6. Conduct calibration after removing or installing the PSU.
scientia non olet · About LEMON Manuals