LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Optima EX >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels - Optima (Except HEV) >> Fender >> Repair Procedures >> Replacement

Repair Procedures: Replacement

CAUTION:
  • Be careful not to damage the fender and body.
  • When removing the clips, use a clip remover.
  1. Remove the front bumper.

    Refer to FRONT BUMPER .

  2. Loosen the mud guard mounting screws.
    Fig 1: Mud Guard Mounting Screws
    G07380157Courtesy of KIA MOTORS AMERICA, INC.
  3. After loosening the mounting screws and clips, then remove the side sill molding (A).
    Fig 2: Side Sill Molding
    G07380158Courtesy of KIA MOTORS AMERICA, INC.
  4. After loosening the mounting screw and bolt, then remove the front bumper side mounting bracket (A).
    Fig 3: Front Bumper Side Mounting Bracket
    G07380159Courtesy of KIA MOTORS AMERICA, INC.
  5. After loosening the fender mounting bolts, then remove the fender (A).
    Fig 4: Loosening Fender Mounting Bolts
    G07380160Courtesy of KIA MOTORS AMERICA, INC.
  6. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals