LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Optima EX >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior Trim & Glass - Optima (Except HEV) >> Crash Pad >> Repair Procedures >> Replacement >> Crash Pad Lower Panel Replacement

Crash Pad Lower Panel Replacement

CAUTION:
  • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Put on gloves to protect your hands.
  1. Using a screwdriver or remover, remove the crash pad side cover (A).
    Fig 1: Crash Pad Side Cover
    G07380328Courtesy of KIA MOTORS AMERICA, INC.
  2. After loosening the mounting screws, then remove the crash pad lower panel (A).
    Fig 2: Crash Pad Lower Panel
    G07380329Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the crash pad lower switch connectors (A), diagnosis connector (B), crash pad under lamp connector (C).

    (LH) 

    Fig 3: Crash Pad Lower Panel Connectors (LH)
    G00548430Courtesy of KIA MOTORS AMERICA, INC.

    (RH) 

  4. Disconnect the start/stop button connector (D).
    Fig 4: Crash Pad Lower Panel Connectors (RH)
    G07380331Courtesy of KIA MOTORS AMERICA, INC.
  5. Installation is the reverse of removal.
NOTE:
  • Make sure the connectors are connected in properly.
  • Replace any damaged clips.
scientia non olet · About LEMON Manuals