LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Optima EX >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators & Gauges - Optima (Except HEV) >> Instrument Cluster >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Using a screwdriver or remover, remove the crash pad side cover (A).
  3. After loosening the mounting screws, then remove the crash pad lower panel (A).
  4. Disconnect the crash pad lower switch connectors (A), diagnosis connector (B), crash pad under lamp connector (C).

    [LH] 

    Fig 1: Crash Pad Lower Switch, Under Lamp And Diagnosis Connectors (LH)
    G00548389Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the start/stop button connector (D).

    6. [RH] 

    Fig 2: Start/Stop Button Connectors
    G00548390Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the crash pad garnish LH (A) after removing the screws.
    Fig 3: Crash Panel Garnish LH Screws
    G00548391Courtesy of KIA MOTORS AMERICA, INC.
  7. Using a screwdriver or remover, remove the crash pad garnish RH (A).
    Fig 4: Crash Panel Garnish RH Screws
    G00548392Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: Apply the protective tapes to crash pad garnish and its related parts.
  8. Remove the instrument cluster fascia panel (A) after loosening the screws.
    Fig 5: Instrument Cluster Fascia Panel (A)
    G00548393Courtesy of KIA MOTORS AMERICA, INC.
  9. Remove the instrument cluster fascia panel (A) after loosening the screws.
    Fig 6: Removing The Instrument Cluster (A)
    G00548394Courtesy of KIA MOTORS AMERICA, INC.
  10. Disconnect the cluster connector (A), then remove the cluster.
    11. Fig 7: Cluster Connector
    G07380863Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals