Rear Seat Side Back Assembly Replacement

[Rear Seat 6:4 Type]

1. Remove the rear seat cushion assembly.
2. After loosening the mounting bolt and then remove the rear seat side back assembly (A) by pulling it up.

[LH] 

Tightening torque : 

16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~18.8 lb-ft)

Fig 1: Identifying Rear Seat Side Back Assembly (LH)
Courtesy of KIA MOTORS AMERICA, INC.

[RH] 

Fig 2: Identifying Rear Seat Side Back Assembly (RH)
Courtesy of KIA MOTORS AMERICA, INC.
3. Installation is the reverse of removal.