Front Seat Outer Shield Cover

CAUTION:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts your hands.
Put on gloves to protect your hands.

Remove the power track & height switch (A) and recliner switch (B).

Fig 1: Power Track/Height Switch & Recliner Switch
Courtesy of KIA MOTORS AMERICA, INC.
Using a screwdriver or remover, remove the front seat outer shield cover (A).

Fig 2: Front Seat Outer Shield Cover Removal
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the connector (A).

Fig 3: Seat Connector
Courtesy of KIA MOTORS AMERICA, INC.
Installation is the reverse of removal.
NOTE:
- Replace any damaged clips.
- Make sure the connector is plugged in properly.
- Be sure to perform PODS re-zero with the GDS after replacing parts (Passenger's).