LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2013 >> Optima SXL >> Repair and Diagnosis >> Accessories & Equipment >> Mirrors >> Exterior Body Panels - Except HEV >> Hood >> Repair Procedures >> Replacement >> Hood Release Handle Replacement

Hood Release Handle Replacement

  1. Using a screwdriver or remover, remove the hood release handle (A).
    Fig 1: Hood Release Handle
    G07380167Courtesy of KIA MOTORS AMERICA, INC.
  2. Installation is the reverse of removal.
NOTE:
  • Make sure the hood latch cable is connected properly.
  • Make sure the hood locks/unlocks and opens/closes properly.
scientia non olet · About LEMON Manuals