LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2013 >> Optima SXL >> Repair and Diagnosis >> Accessories & Equipment >> Mirrors >> Exterior Body Panels - Except HEV >> Hood >> Repair Procedures >> Replacement >> Hood Latch Replacement

Hood Latch Replacement

  1. After loosening the mounting clips and bolts, then remove the radiator upper cover (A).
    Fig 1: Radiator Upper Cover, Mounting Clips & Bolts
    G07380168Courtesy of KIA MOTORS AMERICA, INC.
  2. Detach the clips, then remove hood latch cover (A).
    Fig 2: Hood Latch Cover
    G07380169Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the hood latch (A) mounting bolts.

    Tightening torque: 

    7.8 ~ 11.8 N.m (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7 lb-ft)

    Fig 3: Hood Latch & Mounting Bolts
    G07380170Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the hood latch cable (A) and remove the hood latch (B).
    Fig 4: Hood Latch & Cable
    G07380171Courtesy of KIA MOTORS AMERICA, INC.
  5. Installation is the reverse of removal.
NOTE:
  • Make sure the hood latch release cable is connected properly.
  • Make sure the hood locks/unlocks and opens/closes properly.
  • Adjust the latch alignment.
scientia non olet · About LEMON Manuals