Trip Switch

Disconnect the negative (-) battery terminal.
Remove the cluster (A).
(Refer to the "CRASH PAD ")

Fig 1: Identifying Cluster
Courtesy of KIA MOTORS AMERICA, INC.
Remove the trip switch connector (A) from the main crash pad.

Fig 2: Identifying Trip Switch Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the trip switch (A).

Fig 3: Identifying Trip Switch Terminals
Courtesy of KIA MOTORS AMERICA, INC.
Check for continuity between the terminals in each switch position according to the table.

Fig 4: Trip Switch Continuity Reference Chart
Courtesy of KIA MOTORS AMERICA, INC.