LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Optima LX, Automatic Trans >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Indicators & Gauges - Except HEV >> Instrument Cluster >> Repair Procedures >> Inspection >> Fuel Gauge

Fuel Gauge

  1. Disconnect the fuel sender connector from the fuel sender.
  2. Connect a 3.4 watt, 12V test bulb to terminals 1 and 3 on the wire harness side connector.
  3. Turn the ignition switch to the ON, and then check that the bulb lights up and the fuel gauge needle moves to full.
    Fig 1: Fuel Sender Connector End View (Harness Side)
    G07380847Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals