LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Optima LX, Automatic Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Fuel Filler Door - Except HEV >> Fuel Filler Door Open Switch >> Repair procedures >> Inspection

Repair procedures: Inspection

  1. Remove the driver door trim.

    Refer to FRONT DOOR .

  2. Remove the switch assembly connector (A) from the door trim.
    Fig 1: Switch Assembly Connector
    G07380834Courtesy of KIA MOTORS AMERICA, INC.
  3. Check for continuity between the terminal No. 1 and No. 2.
    FUEL FILLER DOOR DESCRIPTION CHART

    NO Description
    1 Fuel filler door B+
    2 Fuel filler door actuator
    3 GND
    4 Trunk lid switch
    Fig 2: Fuel Filler Door Open Switch Connector End View
    G07380835Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the fuel filler door switch assembly (A) after pressing the fixing clips (B).
    Fig 3: Fuel Filler Door Switch Assembly & Fixing Clips
    G07380836Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals