Repair Procedures: Replacement: Removal

NOTE:

Remove the following items.
1. Front pillar trim
  Refer to Front Pillar Trim Replacement .
2. ECM mirror
  Refer to MIRROR .
3. Rain sensor
  Refer to RAIN SENSOR
4. Windshield wiper arm
  Refer to COWL TOP COVER .
5. Cowl top cover
  Refer to COWL TOP COVER .
6. Windshield glass deicer connector
Refer to WINDSHIELD DEICER .
Using a screwdriver or remover, remove the windshield side molding (A).

Fig 1: Windshield Side Molding
Courtesy of KIA MOTORS AMERICA, INC.
Cut out the windshield sealant using the sealant cutting tool (09861-31100).

Fig 2: Cutting Out Windshield Sealant Using Sealant Cutting Tool (09861-31100)
Courtesy of KIA MOTORS AMERICA, INC.
NOTE:
- Do not scrape down to the painted surface of the body; damaged paint will interfere with proper bonding.
- Remove the rubber dam and fasteners from the body.
- Mask off surrounding surfaces before painting.
Remove the windshield glass (B) carefully using the glass holder (A).

Fig 3: Removing Windshield Glass Using Glass Holder

Courtesy of KIA MOTORS AMERICA, INC.