LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Optima LX, Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Body Control - Smart Junction Box Diagnosis - Except HEV >> DTC B2521: Turn Signal RH Rear Open Circuit >> Inspection/Repair >> W/Harness Inspection >> Terminal & Connector Inspection

Terminal & Connector Inspection

  1. Many malfunctions in the electrical system are caused by poor harness(es) and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
  2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
  3. Has a problem been found?

    YES 

    NO 

scientia non olet · About LEMON Manuals