System Inspection

IBAU system Air bleeding mode
1. Perform air bleeding after replacing the PSU pump.
2. Refer to "Service Information" and perform air bleeding.
3. Perform Compulsory Circulation Mode of "S/W Management" using GDS.
  
  Fig 1: Screen Display - Vehicle S/W Management
  Courtesy of KIA MOTORS AMERICA, INC.
  
  Fig 2: Screen Display - Compulsory Circulation Mode (1 Of 3)
  Courtesy of KIA MOTORS AMERICA, INC.
  
  Fig 3: Screen Display - Compulsory Circulation Mode (2 Of 3)
  Courtesy of KIA MOTORS AMERICA, INC.
  
  Fig 4: Screen Display - Compulsory Circulation Mode (3 Of 3)
  Courtesy of KIA MOTORS AMERICA, INC.
4. When the "Compulsory Circulation Mode" has been finished perfectly, go to "Verification of Vehicle Repair " procedure.