| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
- High accumulator pressure charging pressure monitoring
|
- Damaged or poor connector connection
- Defected high pressure accumulator
- Air bleeding is not properly completed.
|
| Threshold Value |
- When one of following condition is met :
- Change in pressure is less than 100 bar for 20 sec.
- Change in pressure is less than 140 bar for 30 sec.
- Change in pressure is less than 157 bar for 45 sec.
|
| Check Lamp |
- Brake (EBD), ABS, ESC, AVH (yellow), Buzzer
|
| Remark |
- Clear condition : Ignition switch "OFF" and then "ON" and brake pedal operation (press and release) for 3 sec.
|