LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Optima Hybrid >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Active Hydraulic Booster (AHB) System - HEV >> Hydraulic Power Unit >> Repair procedures >> Installation >> Calibration procedure

Calibration procedure

  1. Connect the GDS. (CAN line or OBD connector)
  2. Turn ignition switch on.
  3. Press calibration button of the pressure sensor.
  4. HPU pressure sensor calibration procedure is performed. (Calibration records, DTC codes erasure)
    Fig 1: Screen Display - HPU Pressure Sensor Calibration
    G08308674Courtesy of KIA MOTORS AMERICA, INC.
  5. Turn ignition switch off after calibration procedure.
  6. Confirm success or failure of calibration.
scientia non olet · About LEMON Manuals