Trunk Lid Latch Replacement

Remove the trunk lid trim.
Disconnect the trunk lid latch connector (A).
Disconnect the cable (B), then loosen the latch assembly (C) mounting bolts and remove.
Tightening torque:

6.9~10.8 N.m (0.7~1.1 kgf.m, 5.1~8.0 lb-ft)

Fig 1: Identifying Trunk Lid Latch Connector, Cable And Latch Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Installation is the reverse of removal.
NOTE:
- Make sure the trunk lid locks/unlocks and opens/closes properly.