LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Optima Hybrid >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels - HEV >> Trunk Lid >> Repair procedure >> Replacement >> Trunk Lid Assembly Replacement

Trunk Lid Assembly Replacement

CAUTION:
  • When removing and installing the trunk lid, an assistant is necessary.
  • Wear gloves to protect hands from injury.
  1. Loosen the trunk inside handle (A) mounting screws.
    Fig 1: Identifying Trunk Inside Handle And Mounting Screws
    G08312925Courtesy of KIA MOTORS AMERICA, INC.
  2. Detach the clips, then remove the trunk lid trim (A).
    Fig 2: Identifying Trunk Lid Trim And Mounting Clips
    G08312926Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect wiring (B) and connectors.
  4. After loosening the mounting bolts, then remove the trunk lid (A).

    Tightening torque: 

    6.9~8.8 N.m (0.7~0.9 kgf.m, 5.1~6.5 lb-ft)

    Fig 3: Identifying Trunk Lid And Wiring
    G08312927Courtesy of KIA MOTORS AMERICA, INC.
  5. Installation is the reverse of removal.
    NOTE:
    • Replace any damaged clips.
scientia non olet · About LEMON Manuals