Repair Procedures: Removal

Disconnect the negative (-) battery terminal.
Remove the side air vent (B) using the SST (A) (09840-1M100). Refer to CRASH PAD .

Fig 1: Removing Side Air Vent
Courtesy of KIA MOTORS AMERICA, INC.

CAUTION: Always use the SST (09840-1M100) to prevent the damage when removing the air vent. Refer to CRASH PAD .
Remove the cluster fascia panel and upper shroud (A) after disconnecting the connector (C).

Fig 2: Cluster Fascia Panel & Upper Shroud
Courtesy of KIA MOTORS AMERICA, INC.
Remove the cluster fascia (A) from the housing after removing 4 screws.

Fig 3: Cluster Fascia & Mounting Screws
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the cluster fascia connectors (A) and then remove the cluster.

Fig 4: Cluster Fascia Connectors
Courtesy of KIA MOTORS AMERICA, INC.