Trip Switch

Disconnect the negative (-) battery terminal.
Remove the cluster fascia panel and upper shroud (A) after disconnecting the connector (B).
Refer to CRASH PAD .

Fig 1: Cluster Fascia Panel, Upper Shroud & Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the trip switch (A) from the cluster fascia panel.

Fig 2: Trip Switch
Courtesy of KIA MOTORS AMERICA, INC.
Check for continuity between the terminals in each switch position according to the table.

Fig 3: Trip Switch Terminal Continuity Chart
Courtesy of KIA MOTORS AMERICA, INC.