Repair Procedures: Inspection: Speedometer
- Adjust the pressure of the tires to the specified level.
- Drive the vehicle onto a speedometer tester. Use wheel chocks (A) as appropriate.
- Check if the speedometer indicator range is within the standard values.CAUTION: Do not operate the clutch suddenly or increase/decrease speed rapidly while testing.NOTE: Tire wear and tire over or under inflation will increase the indication error.
CANADA
SPEEDOMETER REFERENCE CHARTVelocity (km/h) 20 40 60 80 100 Tolerance (km/h) +2.6
+0.1+2.9
+0.4+3.2
+0.7+4.0
+1.0+4.3
+1.3Velocity (km/h) 120 140 160 180 220 Tolerance (km/h) +4.6
+1.6+5.0
+2.0+5.5
+2.5+6.5
+3.0+7.5
+4.0USA
SPEEDOMETER REFERENCE CHARTVelocity (MPH) 20 40 60 80 Tolerance (MPH) +2.3
+0.3+2.5
+0.5+2.9
+0.9+3.8
+1.3Velocity (MPH) 100 120 140 150 Tolerance (MPH) +4.2
+1.7+5.1
+2.1+5.5
+2.5+5.9
+2.9