Repair procedures: Inspection: Speedometer

Adjust the pressure of the tires to the specified level.
Drive the vehicle onto a speedometer tester. Use wheel chocks (A) as appropriate.
[2WD]

Fig 1: Identifying Wheel Chocks (2WD)
Courtesy of KIA MOTORS AMERICA, INC.

[4WD]

Fig 2: Identifying Wheel Chocks (4WD)
Courtesy of KIA MOTORS AMERICA, INC.

Check if the speedometer indicator range is within the standard values.

CAUTION: Do not operate the clutch suddenly or increase/decrease speed rapidly while testing.

NOTE: Tire wear and tire over or under inflation will increase the indication error.

[Canada]

VELOCITY SPECIFICATION CHART

Velocity (km/h)	20	40	60	80	100	120
Tolerance (km/h)	0 +3.0	0 +3.0	0 +3.0	+1.0 +4.0	+2.0 +5.0	+3.0 +6.0
Velocity (km/h)	140	160	180	200	220	240
Tolerance (km/h)	+4.0 +7.0	+5.0 +8.0	+5.5 +9.0	+6.0 +10.0	+6.5 +10.5	+7.0 +11.0

[USA]

VELOCITY SPECIFICATION CHART

Velocity (MPH)	10	20	40	60	80
Tolerance (MPH)	0 +2.0	0 +2.0	0 +2.0	+1.0 +3.0	+2.0 +4.0
Velocity (MPH)	100	120	140	150
Tolerance (MPH)	+3.0 +6.0	+3.0 +6.0	+4.0 +7.0	+4.0 +7.0