LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2011 >> Rio LX >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior >> Crash Pad >> Repair procedures >> Replacement >> Audio Assemble Replacement

Audio Assemble Replacement

  1. Remove the center facia panel.
  2. Loosen the screws.
  3. Disconnect the audio connector and antenna cable, then remove the audio assembly (A).
    Fig 1: Identifying Audio Assembly With Screws
    G06829485Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse of removal.
    NOTE:
    • Make sure the connector is plugged in properly.
scientia non olet · About LEMON Manuals