LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2011 >> Rio Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators And Gauges >> Instrument Cluster >> Repair procedures >> Replacement

Repair procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the cluster facia panel (B) after disconnecting the connector of trip switch (A) and loosening the 2 screws take care of fixing clips (C).
    Fig 1: Identifying Trip Switch, Cluster Facia Panel And Clips
    G06832153Courtesy of KIA MOTORS AMERICA, INC.
  3. Pull out the cluster (A) from the housing after removing 4 screws.
    Fig 2: Identifying Cluster
    G06832154Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the cluster connector (A) and then remove the cluster.
    Fig 3: Identifying Cluster Connector
    G06832155Courtesy of KIA MOTORS AMERICA, INC.
  5. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals