LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2011 >> Rio Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators And Gauges >> Instrument Cluster >> Repair procedures >> Inspection >> Speedometer

Repair procedures: Inspection: Speedometer

  1. Adjust the pressure of the tires to the specified level.
  2. Drive the vehicle onto a speedometer tester. Use wheel chocks as appropriate.
  3. Check if the speedometer indicator range is within the standard values.
    CAUTION: Do not operate the clutch suddenly or increase/decrease speed rapidly while testing.
    NOTE: Tire wear and tire over or under inflation will increase the indication error.
    Fig 1: Identifying Wheel Chocks
    G06832156Courtesy of KIA MOTORS AMERICA, INC.

    [CANADA - km/h] 

    SPEEDOMETER REFERENCE CHART (CANADA - km/h)

    Velocity (km/h) 20 40 60 80 100
    Tolerance (km/h) +3.9
    +0.1    		 +3.9
    +0.1    		 +4.3
    +0.1    		 +4.5
    +0.1    		 +4.7
    +0.1
    Velocity (km/h) 120 140 160 180 200
    Tolerance (km/h) +4.7
    +0.1    		 +4.9
    +0.1    		 +5.2
    +0.2    		 +5.2
    +0.2    		 +5.2
    +0.2

    [MPH] 

    SPEEDOMETER REFERENCE CHART (MPH)

    Velocity (MPH) 10 20 40 60
    Tolerance (MPH) +2.4
    +0.1    		 +2.4
    +0.1    		 +2.7
    +0.1    		 +2.9
    +0.1
    Velocity (MPH) 80 100 120 -
    Tolerance (MPH) +2.9
    +0.1    		 +3.2
    +0.1    		 +3.2
    +0.1    		 -
scientia non olet · About LEMON Manuals