Repair procedures: Replacement: Removal
NOTE:
- Put on gloves to protect your hands.
- Use seat covers to avoid damaging any surfaces.
- Remove the following items.
- Front pillar trim, both sides.
- Windshield wiper arms and cowl cover. Refer to REMOVAL .
- Remove the windshield glass molding (A) from the edge of the windshield (B). If necessary, cut the molding with a utility knife.
- Remove the spacer.
- Cut out the windshield sealant using the sealant cutting tool (A) (09861-31100).
- Remove the windshield (B) carefully using the glass holder (A).